Forskel mellem versioner af "CCNA tips"
Freesoft (diskussion | bidrag) (Fra frac.dk) |
Freesoft (diskussion | bidrag) (→Sem. 2: OSPF) |
||
| Linje 33: | Linje 33: | ||
= Sem. 2 = | = Sem. 2 = | ||
| + | '''OSPF''' | ||
| + | |||
| + | If the network type of an interface is broadcast, the default OSPF priority is 1. When OSPF priorities are the same, the OSPF election for DR is decided on the router ID. The highest router ID is selected. | ||
| + | |||
| + | A value of 0 prevents that router from being elected. | ||
== Links == | == Links == | ||
http://en.wikipedia.org/wiki/Distance-vector_routing_protocol | http://en.wikipedia.org/wiki/Distance-vector_routing_protocol | ||
Versionen fra 13. aug 2006, 13:47
Her vil jeg komme med mine tips og links til CCNA, som jeg netop er igang med, hvor du kan finde mere om det man lære og andet. Labs conf. filer.
Indholdsfortegnelse
Sem. 1
Links
http://en.wikipedia.org/wiki/Private_IP_address
http://en.wikipedia.org/wiki/Network_switch
http://en.wikipedia.org/wiki/Router
http://en.wikipedia.org/wiki/Category:Data_transmission
http://en.wikipedia.org/wiki/RJ45
http://en.wikipedia.org/wiki/TIA/EIA-568-B
Subnet
Gennemgang af hvordan man subnetter
http://en.wikipedia.org/wiki/IPv4_subnetting_reference
http://rfc.sunsite.dk/rfc/rfc1860.html
http://en.wikipedia.org/wiki/Subnetwork
http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing
Sem. 2
OSPF
If the network type of an interface is broadcast, the default OSPF priority is 1. When OSPF priorities are the same, the OSPF election for DR is decided on the router ID. The highest router ID is selected.
A value of 0 prevents that router from being elected.
Links
http://en.wikipedia.org/wiki/Distance-vector_routing_protocol
http://en.wikipedia.org/wiki/Link-state_routing_protocol
http://en.wikipedia.org/wiki/Routing_Information_Protocol
Sem. 3
Links
Sem. 4
Links
Links til det hele
Links bare er gode til alle semestre:
http://ciscoforum.dk
