Forskel mellem versioner af "Fortinet"

Fra NørderiWiki
Skift til: Navigation, Søgning
(Policy route)
 
(54 mellemliggende versioner af den samme bruger vises ikke)
Linje 1: Linje 1:
 
Her er lidt tekniske tips til Fortigate fra Fortinet.
 
Her er lidt tekniske tips til Fortigate fra Fortinet.
  
= NAT / VIP - Port forward =
+
= Port forward - NAT / VIP =
 
Lav VIPs for hver port der skal åbnes/forwardes, fx:
 
Lav VIPs for hver port der skal åbnes/forwardes, fx:
  
 
public.y.xxx.zz --> 192.168.1.50 (TCP: 3390 --> 3389)
 
public.y.xxx.zz --> 192.168.1.50 (TCP: 3390 --> 3389)
 +
 +
https://wiki.kvig.dk/images/fortinet/PortForward-VIP.png
  
 
Hvis der er flere porte mod samme server, kan der laves en VIP group.
 
Hvis der er flere porte mod samme server, kan der laves en VIP group.
  
Herefter er det bare at lave en policy med VIP group som destination og ALL i Service.
+
'''Herefter''' skal der laves en policy med VIP group som destination og ALL i Service.
  
Se https://docs.fortinet.com/uploaded/files/1652/using-port-forwarding-on-a-FortiGate-unit.pdf
+
Se mere her:
 +
<br />
 +
https://docs.fortinet.com/uploaded/files/1652/using-port-forwarding-on-a-FortiGate-unit.pdf
 +
<br />
 +
http://help.fortinet.com/fos50hlp/56/Content/FortiOS/fortigate-firewall/Object%20Configuration/Virtual%20IPs/Configuring%20a%20VIP%20for%20IPv4.htm
 +
<br />
 +
http://help.fortinet.com/fos50hlp/56/Content/FortiOS/fortigate-firewall/Object%20Configuration/Addresses/Addresses.htm
  
 +
= Firewall sikkerheds tips =
  
http://help.fortinet.com/fos50hlp/56/Content/FortiOS/fortigate-firewall/Object%20Configuration/Virtual%20IPs/Configuring%20a%20VIP%20for%20IPv4.htm
+
* Hold firewall opdateret. Se [https://community.fortinet.com/t5/FortiGate/Technical-Tip-Recommended-Release-for-FortiOS/ta-p/227178 Technical Tip: Recommended Release for FortiOS] for anbefalet software version.
  
 +
* Opsæt blokering af kendte ''dårlige'' forbindelser, se [https://www.reddit.com/r/fortinet/comments/riphy0/isdb_maliciousmaliciousserver/ Reddit tråd]. Se herunder også.
  
http://help.fortinet.com/fos50hlp/56/Content/FortiOS/fortigate-firewall/Object%20Configuration/Addresses/Addresses.htm
+
* Opsæt [https://docs.fortinet.com/document/fortigate/6.2.0/new-features/734531/ip-reputation-filtering IP Reputation Filtering]
 +
 
 +
== Indgående trafik ==
 +
*Begræns indgående firewall åbninger så meget som muligt.
 +
 
 +
*Tag FMG Access fra på WAN port/interface. Hvis ikke i brug.
 +
 
 +
*Benyt mulighed for kun at åbne for bestemte IP'er, lande eller internet services ([https://www.fortiguard.com/updates/isdb ISDB]).
 +
 
 +
*Opsæt IPS på services, fx webservere. Men begræns scanning kun til de services der er i brug. Fx ingen grund til at scanne HTTP på en mail server.
 +
 
 +
*Block alt trafik fra botnet, malicious, phishing, spam, Tor exit node og proxy servere med ISDB:
 +
 
 +
https://wiki.kvig.dk/images/fortinet/UnwantedConnectionsFromWAN.png
 +
 
 +
config firewall internet-service-group
 +
edit "UnwantedConnectionsFromWAN"
 +
set direction destination
 +
set member 3080383 11337935 3211457 3014850 3145920 2818243 12779753
 +
next
 +
end
 +
 
 +
== Udgående ==
 +
 
 +
*Bloker alt trafik til botnet, malicious, phishing, spam, Tor exit node og proxy servere med ISDB. Se herunder.
 +
*Bloker alt SMB trafik!
 +
*Opsæt Web og DNS filter.
 +
*Opsæt App control - https://www.fortiguard.com/appcontrol
 +
 
 +
https://wiki.kvig.dk/images/fortinet/UnwantedConnectionsToWAN.png
 +
 
 +
config firewall internet-service-group
 +
    edit "UnwantedConnectionsToWAN"
 +
        set direction destination
 +
        set member 3080383 11337935 3211457 3014850 3145920 2818238 12779753
 +
    next
 +
end
 +
 
 +
Opsæt Web filter blokering:
 +
<pre>
 +
Proxy Avoidance
 +
Malicious Websites
 +
Phishing
 +
Spam URLs
 +
Dynamic DNS
 +
Newly Observed Domain
 +
Newly Registered Domain
 +
</pre>
 +
 
 +
= SSL VPN =
 +
Forholdsvist simpelt at sætte op, da man kan bruge standard opsætning og så ændre firewall policy hvis man vil styre hvilke brugere der kan tilgå hvilke interne enheder.
  
= DNS/Web filter og sikkerheds tips =
 
  
Block botnet og "farlige" sider.
 
  
 
= Policy route =
 
= Policy route =
 
Fx have anden route for en bestemt enhed, via en anden VPN forbindelse.
 
Fx have anden route for en bestemt enhed, via en anden VPN forbindelse.
  
 
+
= Public IP DNS translation =
= public ip =
+
  
 
DNS translation
 
DNS translation
Linje 38: Linje 95:
 
         next
 
         next
 
     end
 
     end
 +
 +
= FortiSwitch =
 +
== Spanning Tree og Loop Guard ==
 +
Spanning Tree er sat til som standard på FortiSwitch, og det sikre til en hvis grad mod loops af andre switche.
 +
 +
Men Loop Guard skal sættes på for at forhindre loops ved "endpoints". Eller hvis man tager Spanning Tree fra.
 +
 +
loop-guard-timeout XX
 +
Sætter hvor mange minutter der skal gå før porten åbnes igen og der tjekkes for loop igen. Standard er 45 minutter. Måske en god ide at sætte lidt ned til fx 10 - 20 minutter.
 +
Hvis der forsat er loop lukkes porten med det samme igen.
 +
 +
Med STP og Loop Guard, så kommer der ikke loops selvom fx 2 "dumme" switche længere ude laver loop.
 +
 +
 +
== Sikkerhed ==
 +
Flytte mgmt til vlan
 +
 +
 +
 +
== Vlan opsætning ==
 +
https://docs.fortinet.com/document/fortiswitch/6.4.2/administration-guide/146333/vlans-and-vlan-tagging
 +
 +
'''Native VLAN''' = Tag indgående pakker med dette VLAN. Og udgående pakker med dette VLAN tag, sendes ud uden vlan tag.
 +
 +
'''Allowed VLAN''' = The allowed VLAN list for each port specifies the VLAN tag values for which the port can transmit or receive packets. For a tagged packet arriving at an ingress port, the tag value must match a VLAN on the allowed VLAN list or the native VLAN. At an egress port, the packet tag must match the native VLAN or a VLAN on the allowed VLAN list.
 +
 +
 +
'''Untagged''' = Udgående pakker med fra dette VLAN udsendes uden vlan-tag.
 +
The untagged VLAN list on a port specifies the VLAN tag values for which the port will transmit packets without the VLAN tag. Any VLAN in the untagged VLAN list must also be a member of the allowed VLAN list.
 +
 +
 +
 +
Local managed:
 +
 +
Opsætning af VLANs på porte:
 +
Switch -> Interface -> Physical
 +
 +
 +
Opsætning af MGMT vlan er under:
 +
System -> Network -> Interface -> VLAN
 +
 +
 +
diagnose switch vlan list
 +
 +
== FortiLink - Managed by Fortigate ==
 +
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Explanation-on-values-of-auto-isl-Fortilink-and/ta-p/189808
 +
 +
= HA Cluster =
 +
 +
Start med at læse her ang. opsætning:
 +
 +
https://docs.fortinet.com/document/fortigate/6.0.0/handbook/581221/fgcp-ha
 +
 +
== Styring af hvem der er primær enhed ==
 +
''override disable'' er standard.
 +
 +
Hvis man gerne vil have at den ene enhed altid er primær (når denne er tændt), skal ''set ha override enable'' sættes op.
 +
 +
Dette giver dog dobbelt failover når den primær enhed kommer op igen.
 +
 +
Læs mere:
 +
*https://community.fortinet.com/t5/FortiGate/Technical-Tip-Restoring-HA-master-role-after-a-failover-using/ta-p/197460
 +
*http://myitmicroblog.blogspot.com/2018/11/what-should-you-know-about-ha-override.html?m=1
 +
*https://community.fortinet.com/t5/FortiGate/Technical-Tip-FortiGate-HA-Primary-unit-selection-process-when/ta-p/249745
  
 
= Små tips =
 
= Små tips =
Linje 45: Linje 166:
  
 
diagnose firewall ipgeo ip2country x.x.x.x
 
diagnose firewall ipgeo ip2country x.x.x.x
 +
 +
 +
== Fiber SFP ==
 +
Auto negotiation virker ikke nødvendigvis, sæt til fast hastighed eller '''Auto-1G'''.
 +
Kan være forskel på SFP moduler.
  
 
= Session helper =
 
= Session helper =
Linje 60: Linje 186:
 
  next
 
  next
  
 +
= VPN - Flere phase 2 =
 +
Flere phase 2 subnets.
 +
 +
Husk at tjekke static routes, og firewall, om alle netværk er tilladt.
  
 
= Layer-2 VPN with VxLAN over IPsec - Extend LAN over IPsec =
 
= Layer-2 VPN with VxLAN over IPsec - Extend LAN over IPsec =
Linje 65: Linje 195:
  
 
[http://www.mirazon.com/vxlan-encapsulation-fortigate/ VXLAN Encapsulation in FortiGate]
 
[http://www.mirazon.com/vxlan-encapsulation-fortigate/ VXLAN Encapsulation in FortiGate]
 +
 +
https://kb.fortinet.com/kb/documentLink.do?externalID=FD47557 Wire pair
  
 
Notes:
 
Notes:
Linje 202: Linje 334:
  
 
= FortiClient =
 
= FortiClient =
Gratis VPN klient og antivirus.
+
Gratis VPN klient, Windows download: https://links.fortinet.com/forticlient/win/vpnagent
  
''Vulnerability Scan'': Holde programmer opdateret. Manuelt via ''Fix Now'' knappen.
+
= Traffic Shaping =
  
 +
"When setting the guaranteed bandwidth, ensure that the value is significantly less than the interface's bandwidth capacity. Otherwise, the interface will allow very little or no other traffic to pass through, potentially causing unwanted latency."
 +
Means that if you have a 100Mbps connection , please make sure the traffic shaper is no more then 70-80% of that bandwidth. In your case, you want to use 50% of the bandwidth which is ok.
  
''Enforce FortiClient Compliance Check'' kræver man har 100% styr på alle devices der kræver internet forbindelse på netværket.
+
This guide is because , beside the forwarded traffic you may also have management traffic, witch will take priority .
  
Når så ''Enforce FortiClient Compliance Check'' er sat til, kan FortiClient hente indstillinger fra Fortigate, fx Web filter, men man skal selv trykke ''Fix non-compliant Settings'' knappen for at rette indstillinger så de passer med dem fra Fortigate.
+
"Does that mean if I set guaranteed-bandwidth to 50 Mbps, and we have a 100 Mbps connection, then other traffic can't use more than 50 Mbps even if the shaped traffic is not used?"
 +
If you set guaranteed-bandwidth to 50Mbps, that traffic will use maximum 50Mbps and will be prioritized over the non shaped traffic. If your prioritized bandwidth will be , for example, 30Mbps at some point, the rest of the traffic will use the remaining 70Mbps . When your prioritized will increase to 50 Mbps, the other traffic will be reduces to use the remaining bandwidth .
  
En work around kan være at exempt hele lan netværket.
+
On other words, the management traffic and shaped traffic will be processed first. The remaining bandwidth will be for the rest of the traffic.
 +
Management traffic means traffic used by the Fortigate to function , for example traffic used to login to Fortigate GUI or CLI.  
  
''Fix non-compliant Settings'' kommer ikke frem hvis ikke ''Enforce FortiClient Compliance Check'' er sat til.
+
 
 +
https://www.fortinetguru.com/2019/10/traffic-shaping/
 +
 
 +
https://docs.fortinet.com/document/fortigate/5.6.0/cookbook/981056/configuring-a-traffic-shaper-to-limit-bandwidth
 +
 
 +
Reverse for at limit download fra internet til en klient. Src: klienten Dst: All (internet)
 +
 
 +
se billede
 +
https://docs.fortinet.com/document/fortigate/5.6.0/cookbook/278575/limiting-bandwidth-with-traffic-shaping
 +
 
 +
 
 +
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/resources/4d801240-7ccc-11e9-81a4-00505692583a/images/5e1cf47076fd67.51321268_diagram-lbts.png
 +
 
 +
 
 +
[https://www.fortinetguru.com/2016/12/reverse-direction-traffic-shaping/ Reverse direction traffic shaping]
 +
 
 +
Shaping på firewall policy (Kun CLI, men vises i GUI når opsat):
 +
config firewall policy
 +
edit 1
 +
set name "LAN to WAN"
 +
set traffic-shaper "Name" # Upload fra klienten.
 +
set traffic-shaper-reverse "Name" # Download til klienten.
 +
 
 +
Kan også sættes på selve interface porten. Husk det gælder for alle enheder til sammen.
 +
config system interface
 +
edit lan
 +
set inbandwidth 30000 # "Upload", ind på porten
 +
set outbandwidth 30000 # "Download", ud af porten
 +
 
 +
 
 +
== Begrænse web server ==
  
 
= VDOM =
 
= VDOM =
Linje 219: Linje 385:
 
  set vdom-admin enable
 
  set vdom-admin enable
 
  end
 
  end
 +
 +
 +
[https://www.historiantech.com/fortigate-recovery-partition/ FortiGate Recovery Partition]
 +
 +
 +
= DNS server =

Nuværende version fra 21. okt 2023, 14:47

Her er lidt tekniske tips til Fortigate fra Fortinet.

Port forward - NAT / VIP

Lav VIPs for hver port der skal åbnes/forwardes, fx:

public.y.xxx.zz --> 192.168.1.50 (TCP: 3390 --> 3389)

PortForward-VIP.png

Hvis der er flere porte mod samme server, kan der laves en VIP group.

Herefter skal der laves en policy med VIP group som destination og ALL i Service.

Se mere her:
https://docs.fortinet.com/uploaded/files/1652/using-port-forwarding-on-a-FortiGate-unit.pdf
http://help.fortinet.com/fos50hlp/56/Content/FortiOS/fortigate-firewall/Object%20Configuration/Virtual%20IPs/Configuring%20a%20VIP%20for%20IPv4.htm
http://help.fortinet.com/fos50hlp/56/Content/FortiOS/fortigate-firewall/Object%20Configuration/Addresses/Addresses.htm

Firewall sikkerheds tips

  • Opsæt blokering af kendte dårlige forbindelser, se Reddit tråd. Se herunder også.

Indgående trafik

  • Begræns indgående firewall åbninger så meget som muligt.
  • Tag FMG Access fra på WAN port/interface. Hvis ikke i brug.
  • Benyt mulighed for kun at åbne for bestemte IP'er, lande eller internet services (ISDB).
  • Opsæt IPS på services, fx webservere. Men begræns scanning kun til de services der er i brug. Fx ingen grund til at scanne HTTP på en mail server.
  • Block alt trafik fra botnet, malicious, phishing, spam, Tor exit node og proxy servere med ISDB:

UnwantedConnectionsFromWAN.png

config firewall internet-service-group
	edit "UnwantedConnectionsFromWAN"
		set direction destination
		set member 3080383 11337935 3211457 3014850 3145920 2818243 12779753
	next
end

Udgående

  • Bloker alt trafik til botnet, malicious, phishing, spam, Tor exit node og proxy servere med ISDB. Se herunder.
  • Bloker alt SMB trafik!
  • Opsæt Web og DNS filter.
  • Opsæt App control - https://www.fortiguard.com/appcontrol

UnwantedConnectionsToWAN.png

config firewall internet-service-group
   edit "UnwantedConnectionsToWAN"
       set direction destination
       set member 3080383 11337935 3211457 3014850 3145920 2818238 12779753
   next
end

Opsæt Web filter blokering:

Proxy Avoidance
Malicious Websites
Phishing
Spam URLs
Dynamic DNS
Newly Observed Domain
Newly Registered Domain

SSL VPN

Forholdsvist simpelt at sætte op, da man kan bruge standard opsætning og så ændre firewall policy hvis man vil styre hvilke brugere der kan tilgå hvilke interne enheder.


Policy route

Fx have anden route for en bestemt enhed, via en anden VPN forbindelse.

Public IP DNS translation

DNS translation http://kb.fortinet.com/kb/documentLink.do?externalID=FD34099

config firewall dnstranslation
   edit 1
       set dst 217.pp.pp.pp
       set netmask 255.255.255.255
       set src 192.168.1.100
       next
   end

FortiSwitch

Spanning Tree og Loop Guard

Spanning Tree er sat til som standard på FortiSwitch, og det sikre til en hvis grad mod loops af andre switche.

Men Loop Guard skal sættes på for at forhindre loops ved "endpoints". Eller hvis man tager Spanning Tree fra.

loop-guard-timeout XX

Sætter hvor mange minutter der skal gå før porten åbnes igen og der tjekkes for loop igen. Standard er 45 minutter. Måske en god ide at sætte lidt ned til fx 10 - 20 minutter. Hvis der forsat er loop lukkes porten med det samme igen.

Med STP og Loop Guard, så kommer der ikke loops selvom fx 2 "dumme" switche længere ude laver loop.


Sikkerhed

Flytte mgmt til vlan


Vlan opsætning

https://docs.fortinet.com/document/fortiswitch/6.4.2/administration-guide/146333/vlans-and-vlan-tagging

Native VLAN = Tag indgående pakker med dette VLAN. Og udgående pakker med dette VLAN tag, sendes ud uden vlan tag.

Allowed VLAN = The allowed VLAN list for each port specifies the VLAN tag values for which the port can transmit or receive packets. For a tagged packet arriving at an ingress port, the tag value must match a VLAN on the allowed VLAN list or the native VLAN. At an egress port, the packet tag must match the native VLAN or a VLAN on the allowed VLAN list.


Untagged = Udgående pakker med fra dette VLAN udsendes uden vlan-tag. The untagged VLAN list on a port specifies the VLAN tag values for which the port will transmit packets without the VLAN tag. Any VLAN in the untagged VLAN list must also be a member of the allowed VLAN list.


Local managed:

Opsætning af VLANs på porte: Switch -> Interface -> Physical


Opsætning af MGMT vlan er under: System -> Network -> Interface -> VLAN


diagnose switch vlan list

FortiLink - Managed by Fortigate

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Explanation-on-values-of-auto-isl-Fortilink-and/ta-p/189808

HA Cluster

Start med at læse her ang. opsætning:

https://docs.fortinet.com/document/fortigate/6.0.0/handbook/581221/fgcp-ha

Styring af hvem der er primær enhed

override disable er standard.

Hvis man gerne vil have at den ene enhed altid er primær (når denne er tændt), skal set ha override enable sættes op.

Dette giver dog dobbelt failover når den primær enhed kommer op igen.

Læs mere:

Små tips

GeoIP

Slå op hvilket land en IP hører til:

diagnose firewall ipgeo ip2country x.x.x.x


Fiber SFP

Auto negotiation virker ikke nødvendigvis, sæt til fast hastighed eller Auto-1G. Kan være forskel på SFP moduler.

Session helper

http://help.fortinet.com/fos50hlp/52data/Content/FortiOS/fortigate-system-administration-52/Session%20Helpers/session_helpers.htm

The FTP session helper monitors PORT, PASV and 227 commands and NATs the IP addresses and port numbers in the body of the FTP packets and opens ports on the FortiGate unit as required. To accept FTP sessions you must add a security policy with service set to any or to the FTP, FTP_Put, and FTP_GET pre-defined services (which all listen on TCP port 21).

Husk at ændre port hvis du kører FTP på andet end port 21:

config system session-helper
edit 1
set name ftp
set port 21
set protocol 6
next

VPN - Flere phase 2

Flere phase 2 subnets.

Husk at tjekke static routes, og firewall, om alle netværk er tilladt.

Layer-2 VPN with VxLAN over IPsec - Extend LAN over IPsec

Technical Note: Building a Layer-2 VPN with VxLAN over IPsec

VXLAN Encapsulation in FortiGate

https://kb.fortinet.com/kb/documentLink.do?externalID=FD47557 Wire pair

Notes: Husk det er L2, så IP opsætning er ikke nødvendigt på interfaces/soft switch. Men hvis den ene side skal have IP, hvis man fx vil udvide LAN over IPsec, så skal IP sættes på soft switchen, og ikke det fysiske interface. Og kun på den ene side af tunnelen.

interface der meldes i switch må ikke have ip opsætning eller bruges af firewall regler.

Først opsættes VPN med encapsulation vxlan. Derefter skal der laves en software switch der binder VPN forbindelsen sammen med en fysisk port. Og så laves der firewall regler mellem interfaces i switchen.

Fortigate 1:

config vpn ipsec phase1-interface
    edit "VXLAN-IPSec-VPN"
        set interface "wan"
        set peertype any
        set proposal aes128-sha1
        set encapsulation vxlan
        set remote-gw 4.3.2.1
        set psksecret KEY
    next


config vpn ipsec phase2-interface
    edit "VXLAN-IPSec-VPN"
        set phase1name "VXLAN-IPSec-VPN"
        set proposal aes128-sha1
    next
end


config system switch-interface
    edit "soft_switch"
        set member "port2" "VXLAN-IPSec-VPN"
        set intra-switch-policy explicit   // (optional)
    next
end


config firewall policy //Hvis du har brugt intra-switch-policy explicit på switch.
    edit 1
        set srcintf "port2"
        set dstintf "VXLAN-IPSec-VPN"
        set srcaddr "all"
        set dstaddr "all"
        set action accept
        set schedule "always"
        set service "ALL"
    next
    edit 2
        set srcintf "VXLAN-IPSec-VPN"
        set dstintf "port2"
        set srcaddr "all"
        set dstaddr "all"
        set action accept
        set schedule "always"
        set service "ALL"
    next
end


config system interface //Hvis det lokale interface skal have IP opsætning, så sættes IP indstilling på switchen i stedet for interface.
    edit "soft_switch"
        set ip 192.168.1.1 255.255.255.0
        set type switch
        set device-identification enable
        set role lan
    next

Fortigate 2:

config vpn ipsec phase1-interface
    edit "VXLAN-IPSec-VPN"
        set interface "wan"
        set peertype any
        set proposal aes128-sha1
        set encapsulation vxlan
        set remote-gw 1.2.3.4
        set psksecret KEY
    next

config vpn ipsec phase2-interface
    edit "VXLAN-IPSec-VPN"
        set phase1name "VXLAN-IPSec-VPN"
        set proposal aes128-sha1
    next
end


config system switch-interface
    edit "soft_switch"
        set member "port2" "VXLAN-IPSec-VPN"
        set intra-switch-policy explicit   // (optional)
    next
end


config firewall policy //Hvis du har brugt intra-switch-policy explicit på switch.
    edit 1
        set srcintf "port2"
        set dstintf "VXLAN-IPSec-VPN"
        set srcaddr "all"
        set dstaddr "all"
        set action accept
        set schedule "always"
        set service "ALL"
    next
    edit 2
        set srcintf "VXLAN-IPSec-VPN"
        set dstintf "port2"
        set srcaddr "all"
        set dstaddr "all"
        set action accept
        set schedule "always"
        set service "ALL"
    next
end

Gemme config / revert

https://kb.fortinet.com/kb/documentLink.do?externalID=FD30912

execute cfg save

Config går automatisk tilbage, hvis det ikke bliver gemt inden for den opsatte tid:

config system global
set cfg-save revert
set cfg-revert-timeout xxx

Husk!

execute cfg save

Hairpin

http://cookbook.fortinet.com/configure-hair-pinning-fortigate/

FortiClient

Gratis VPN klient, Windows download: https://links.fortinet.com/forticlient/win/vpnagent

Traffic Shaping

"When setting the guaranteed bandwidth, ensure that the value is significantly less than the interface's bandwidth capacity. Otherwise, the interface will allow very little or no other traffic to pass through, potentially causing unwanted latency." Means that if you have a 100Mbps connection , please make sure the traffic shaper is no more then 70-80% of that bandwidth. In your case, you want to use 50% of the bandwidth which is ok.

This guide is because , beside the forwarded traffic you may also have management traffic, witch will take priority .

"Does that mean if I set guaranteed-bandwidth to 50 Mbps, and we have a 100 Mbps connection, then other traffic can't use more than 50 Mbps even if the shaped traffic is not used?" If you set guaranteed-bandwidth to 50Mbps, that traffic will use maximum 50Mbps and will be prioritized over the non shaped traffic. If your prioritized bandwidth will be , for example, 30Mbps at some point, the rest of the traffic will use the remaining 70Mbps . When your prioritized will increase to 50 Mbps, the other traffic will be reduces to use the remaining bandwidth .

On other words, the management traffic and shaped traffic will be processed first. The remaining bandwidth will be for the rest of the traffic. Management traffic means traffic used by the Fortigate to function , for example traffic used to login to Fortigate GUI or CLI.


https://www.fortinetguru.com/2019/10/traffic-shaping/

https://docs.fortinet.com/document/fortigate/5.6.0/cookbook/981056/configuring-a-traffic-shaper-to-limit-bandwidth

Reverse for at limit download fra internet til en klient. Src: klienten Dst: All (internet)

se billede https://docs.fortinet.com/document/fortigate/5.6.0/cookbook/278575/limiting-bandwidth-with-traffic-shaping


5e1cf47076fd67.51321268_diagram-lbts.png


Reverse direction traffic shaping

Shaping på firewall policy (Kun CLI, men vises i GUI når opsat):

config firewall policy
edit 1
set name "LAN to WAN"
set traffic-shaper "Name" # Upload fra klienten.
set traffic-shaper-reverse "Name" # Download til klienten.

Kan også sættes på selve interface porten. Husk det gælder for alle enheder til sammen.

config system interface
edit lan
set inbandwidth 30000 # "Upload", ind på porten
set outbandwidth 30000 # "Download", ud af porten


Begrænse web server

VDOM

config system global
set vdom-admin enable
end


FortiGate Recovery Partition


DNS server