UniFI

Fra NørderiWiki
Version fra 27. jan 2015, 07:19 af Freesoft (diskussion | bidrag) Freesoft (diskussion | bidrag) (En start)

(forskel) ←Ældre version | se nuværende version (forskel) | Nyere version→ (forskel)
Skift til: Navigation, Søgning

Reset:

  • SSH into the AP and issue 'syswrapper.sh restore-default'
  • You can use the UniFi discovery tool (installed with the UniFi controller) to reset the UniFi AP to defaults.

Once the unit is reset it will come into default state, please try setting the inform URL by following these steps:

  • SSH into the AP and issue ‘syswrapper.sh restore-default’ to get back to factory settings.
  • SSH into the AP and type: mca-cli
  • Next type: set-inform http://ip-of-controller:8080/inform


ubnt / ubnt

Hentet fra "https://wiki.kvig.dk/index.php?title=UniFI&oldid=3639"